The foreground tool is used when something is obstructing the structure you are masking eg. Trees, mail boxes, bushes, fences, light bulbs, flowerpots  etc.. The foreground will act as the topmost layer of the design. The foreground tool allows you to mask anything that your visualizer should keep on top of the image. We suggest zooming into the object you want to mask as foreground so you can really concentrate on the details clicking as many times as you need to change direction to define the shape of the object you are trying to make foreground.

To share different options of the same project with your client, the snapshots tool will come in handy while sharing different design options with your Homeowners. Read about;

 What are Snapshots

How To Use Snapshots 

Save, View and Print Snapshots

• Go to the ‘Visualize tab
• Find the camera button (below the image) and click on one of the Snapshots you have taken.
• This will enlarge the snapshot image roll and allow you to select more than one. Once you select the ones you want to compare, hit “Compare Selected”
• You will then see a popup in a presentation style along with the before image.
• To see how to save this, read the section under ‘Saving & Sharing Designs”

Saved projects can be found under the ‘saved project’ on the homepage of your Renoworks Pro Visualizer. Snapshots enable you to change the Masking on a project while keeping the original masking version intact. You can save up to 10 Snapshots under each project in your account. Find the Snapshots (camera button) option under the “Visualize” tab.

The Snapshot tool helps you:

1. Provide customers with choice of products and how they look
2. Provide customers with options where the masking will require minor changes like in this example (Link to example above)
3. Compare products when your customers are confused or not able to make up their mind. Here is how you can save, view and print snapshots (Link to  Save, View and Print Snapshots)

Here is an example of a house to understand how to use the Snapshot tool better. Say you have to provide a customer with 2 options on an existing siding you will be replacing.

Option 1: Siding only

Option 2 : Siding with masonry kneeboard

To achieve option 1:

• Go to “draw” tab and mask the siding
• Set perspective
• Now go to “Visualize” and click on the little camera button and take a “Snapshot”

Option 2:

• You can now go back to the “Draw” tab and add an additional layer where you want the masonry kneeboard
• Now go back to “Visualize” tab, add the masonry option you likeand take a second “Snapshot”

You can now switch between the snapshots and play around with different options for each.

Don’t forget to save the project under “Save & Review”. Each saved project can have upto to 10 snapshots. This tool enables you to provide options or make versatile presentations to your customers. If you add the 11th snapshot when only 10 can be saves, it will over write snapshot no.1. You may save as many designs of each snapshot as you like to your computer.

To compare different options within a project, use the snapshot tool. Read more about;

What are Snapshots

How to use Snapshots

You set perspective to a layer by masking it under the “Draw” tab which will enable a set of new options on the left side of the page once the layer has been drawn. You can change, edit or reset the perspective of any layer at any time by going back to the “Draw” tab and clicking on the layer, you will then see the ‘Set Perspective’ option on the left. 

The Perspective tool lets the software know the angle of any surface. You need to set perspective for all siding and roofing. Any surface that is sloping or slanting.

The perspective tool is the most important tool while working on any elements with an angle (sloping or slanted). You must ALWAYS set perspective to siding and roofing layers. This tool allows your visualizer to know what angle the element is in and how close or further away it might be from where the photo was taken.

The Trim library is currently under the ‘Paint’ library in your Renoworks Pro Visualizer. You can read more about overlap of libraries here. Adding trim should be done at the right stage of the Masking process as the software works in layers (link).

The right time to work on Trim is after you have masked the siding and before you mask the windows (Just like you would on a real job!) Using the paint, trim or wall tool follow these steps:

1. Draw a square or rectangle beyond the window to the thickness you would like your trim to be.
2. Cut out the window
3. Go to the ‘Visualize’ tab and you can apply different paint colours to represent the trim.

The window will always apply as the top most layer and all you will see is the colour around the window looking like the trim.

Under the ‘Visualize’ tab, on the left side of the page you will find a red button with a wheel next to the search bar, you can select any color which will let you view all the products within a certain colour category.

The process of uploading an image and designing it is called Masking in your Renoworks Pro Visualizer. The Masking process takes place under the “Draw” tab. Before applying products to your clients home, you must mask the image to define various layers of the home. 

Before you get started, keep in mind that the software works in layers – what you mask first will appear as the bottom most layer. After that, each mask will go on top of the previous layer.

This rule applies to everything except doors and windows. They will appear on top of all the layers (except foreground) automatically. We recommend that you plan the order in which you will do the Masking before you get started. Eventually this will become second nature!

It can look something like this:

• Siding
• Masonry
• Roof
• Trim
• Windows
• Doors
• Foreground

A few things that will be good to know when you start:

• To mask an area you have to first select the category it fits under
• To start masking you will have to draw around the perimeter of an area clicking every time you want to change direction and ending where you started to complete a layer
• Every point you clicked on to change direction is movable, so don’t worry if your lines aren’t straight

Masking is the process of tracing or defining different surfaces of the house that you will apply your selected product and designs. You can do so under the ‘Draw’ tab. To learn more about Masking, watch this video. Alternatively, you can also book a one – on – one Quickstart Session with your Customer Success Ambassador here. 

. If you want to know more about this, call our support line at +1 877 980 3880, email us at support@renoworks.com, or speak to someone from the  Renoworks Pro Customer Success team on LiveChat.

Your time is a valuable thing. Renoworks offers ‘Design Services’ to help prepare your images, so you can focus on delivering exceptional quality and service to homeowners. To get started, go to www.renoworkspro.com/designrequest

You can customize your Renoworks Pro Visualizer in many ways! Several features you can customize are:

• Product types
• Manufacturers
• Product ranges within manufacturers
• Colors within product ranges
• Company Branding such as logo and color of buttons

To customize your Renoworks Pro Visualizer, please call our support line at +1 877 980 3880, email us at support@renoworks.com, or speak to someone from the  Renoworks Pro Customer Success team on LiveChat.

The ‘Paint’ library includes paint as well as trim manufacturers. To get access to the Paint library, you can also draw the surface as a wall.

The Renoworks Pro Visualizer library has a few overlaps. The ‘Trim’ library is the same as the Paint library and includes Trim options from some manufacturers like ABC seamless, Alside, Continental Manufacturing, Exterior Portfolio, James Hardie, Mitten. The Trim library right now is great to show your clients what the Trim color will look like on their house. If you draw the Trim as ‘Paint’ or ‘Wall’ you will get access to the same library because of the overlap.

The Renoworks Pro Visualizer library has a few overlaps.

The ‘Wall’ Library includes manufacturers within:

• Siding
• Paint
• Masonry

Sometime the settings on your email will block your Renoworks Pro Visualizer from creating a pop up with the link in the email to share with your clients or colleagues.

A quick fix for this:

• Go to the ‘Save & Review’ tab of your client’s project
• Copy the URL on the top of the browser
• Paste it in an email body and its ready to send to your client

To share the Renoworks Pro Visualizer with your clients:

• Go to the ‘Save & Review’ tab of your client’s project.
• Copy the URL on the top of the browser
• Paste it in an email body and send it to your client.

NOTE: Because your client does not have an account with Renoworks, they will only have access to view the “Visualize” and “Save & review” tabs.

Don’t forget you can customise any of the features before you share the visualizer with your client.

To save the presentation style Before and After version of your project:

• Click on “Print”
• Click on “Print Page” on the top left corner of the pop up window. This will generate another popup.
• On the pop up, hit “Print” again. This command will prompt you to save the presentation on your computer.
• Select the location you would like to save it under and you can now access the presentation style before and after photo from your computer.

You may then email this image to your customers.

To save the ‘Image Only’ format of your project:

• Click on  “Save & Review”.
• Click on “Print” and a pop-up will appear in a presentation format where there will be Before & After Presentation style of your project
• Right click on the image you want to save
• Click on “save image as”. This will enable you to select a location on your computer to save this design. It will be saved as a .JPG file

You may then email this image to your customers, add it to your website, a custom presentation or use it to create content for your social media channels or newsletters.

To save the presentation style before and after version of your project:

• Got to the ‘Save & Review’ tab
• Click on “Print”
• Click on “Print Page” on the top left corner of the pop up window. This will generate another popup.
• On the pop up, hit “Print” again while making sure the destination says PDF. This command will prompt you to save the presentation on your computer.
• Select the location you would like to save it under and you can now access the presentation style before and after photo from your computer.

You may then email this image to your customers, add it to your website, a custom presentation or use it to create content for your social media channels or newsletters.

You can print or save your designs as one of two styles:

1. Presentation Style (Before & After) in PDF

1. 1. Go to your Renoworks Pro Visualizer
   2. Click on “Projects” on your home screen
   3. Click on the project you would like to print to PDF
   4. Go to the “Save & Review” tab
   5. Click on “Print” and then “Print Page” on the top left corner of the pop up window
   6. This will generate another popup. Find the ‘Destination’ of this printer and make sure it says PDF and not the name of a printer
   7. This command will prompt you to save the presentation on your computer.
   8. Select the location you would like to save it under and save

1. Image Only Style in .JPEG
   1. Go to the “Save & Review” tab
   2. Click on “Print” and a pop-up will appear in a presentation format where there will be Before & After presentation style layout of your project.
   3. Right click on the image you want to save
   4. Click on “save image as”. This will enable you to select a location on your computer to save this design. It will be saved as a .JPG file.

You may then email this image to your client or team member, add it to a custom presentation or use it to create content for your website, social media channels or newsletters.

To save a design to your visualizer :

• Go to the “Save & Review” tab
• Find “Save to my account” on the left side of the page.

You can access these saved projects anytime under ‘Projects’ on the home page.

To learn how to save a .JPEG of your design to your computer, here. To learn how to save a presentation style ‘Before & After’ PDF of your design, click here.

To print your Renoworks Pro designs:

1. Go to your Renoworks Pro Visualizer
2. Click on “Projects” on your home screen
3. Click on the project you would like to print
4. Go to the “Save & Review” tab
5. Click on ‘Print’ (Left side of the page) and follow the instructions.

To print multiple snapshots in the same presentation format, look at the instructions under “Save, view & print snapshots” (link) 

When you upload a photo, before you can start masking, the software will ask you to ‘Set Scale’. The scale helps the software understand how close or away you were from the house when you took the photo.

To set the scale, indicate the real life height of any given object of the house – for example, a door, window or the height of the house itself.

Do this by clicking on the top part of the object you are measuring (Point A), drawing a vertical line down and click on the bottom (Point B) to complete the measurement. The default scale is set to that of  a door at 6’ 8” however you have the option to adjust  the scale to define the height of whatever object you have selected. Make sure the line you draw is straight.

If you do not set the scale correctly, the products you want to apply to the home will not show correctly.

The foreground tool is used when something is obstructing the structure you are masking eg. Trees, mail boxes, bushes, fences, light bulbs, flowerpots  etc.. The foreground will act as the topmost layer of the design. The foreground tool allows you to mask anything that your visualizer should keep on top of the image. We suggest zooming into the object you want to mask as foreground so you can really concentrate on the details clicking as many times as you need to change direction to define the shape of the object you are trying to make foreground.

To share different options of the same project with your client, the snapshots tool will come in handy while sharing different design options with your Homeowners. Read about;

 What are Snapshots

How To Use Snapshots 

Save, View and Print Snapshots

• Go to the ‘Visualize tab
• Find the camera button (below the image) and click on one of the Snapshots you have taken.
• This will enlarge the snapshot image roll and allow you to select more than one. Once you select the ones you want to compare, hit “Compare Selected”
• You will then see a popup in a presentation style along with the before image.
• To see how to save this, read the section under ‘Saving & Sharing Designs”

Saved projects can be found under the ‘saved project’ on the homepage of your Renoworks Pro Visualizer. Snapshots enable you to change the Masking on a project while keeping the original masking version intact. You can save up to 10 Snapshots under each project in your account. Find the Snapshots (camera button) option under the “Visualize” tab.

The Snapshot tool helps you:

1. Provide customers with choice of products and how they look
2. Provide customers with options where the masking will require minor changes like in this example (Link to example above)
3. Compare products when your customers are confused or not able to make up their mind. Here is how you can save, view and print snapshots (Link to  Save, View and Print Snapshots)

Here is an example of a house to understand how to use the Snapshot tool better. Say you have to provide a customer with 2 options on an existing siding you will be replacing.

Option 1: Siding only

Option 2 : Siding with masonry kneeboard

To achieve option 1:

• Go to “draw” tab and mask the siding
• Set perspective
• Now go to “Visualize” and click on the little camera button and take a “Snapshot”

Option 2:

• You can now go back to the “Draw” tab and add an additional layer where you want the masonry kneeboard
• Now go back to “Visualize” tab, add the masonry option you likeand take a second “Snapshot”

You can now switch between the snapshots and play around with different options for each.

Don’t forget to save the project under “Save & Review”. Each saved project can have upto to 10 snapshots. This tool enables you to provide options or make versatile presentations to your customers. If you add the 11th snapshot when only 10 can be saves, it will over write snapshot no.1. You may save as many designs of each snapshot as you like to your computer.

To compare different options within a project, use the snapshot tool. Read more about;

What are Snapshots

How to use Snapshots

You set perspective to a layer by masking it under the “Draw” tab which will enable a set of new options on the left side of the page once the layer has been drawn. You can change, edit or reset the perspective of any layer at any time by going back to the “Draw” tab and clicking on the layer, you will then see the ‘Set Perspective’ option on the left. 

The Perspective tool lets the software know the angle of any surface. You need to set perspective for all siding and roofing. Any surface that is sloping or slanting.

The perspective tool is the most important tool while working on any elements with an angle (sloping or slanted). You must ALWAYS set perspective to siding and roofing layers. This tool allows your visualizer to know what angle the element is in and how close or further away it might be from where the photo was taken.

The Trim library is currently under the ‘Paint’ library in your Renoworks Pro Visualizer. You can read more about overlap of libraries here. Adding trim should be done at the right stage of the Masking process as the software works in layers (link).

The right time to work on Trim is after you have masked the siding and before you mask the windows (Just like you would on a real job!) Using the paint, trim or wall tool follow these steps:

1. Draw a square or rectangle beyond the window to the thickness you would like your trim to be.
2. Cut out the window
3. Go to the ‘Visualize’ tab and you can apply different paint colours to represent the trim.

The window will always apply as the top most layer and all you will see is the colour around the window looking like the trim.

Under the ‘Visualize’ tab, on the left side of the page you will find a red button with a wheel next to the search bar, you can select any color which will let you view all the products within a certain colour category.

The process of uploading an image and designing it is called Masking in your Renoworks Pro Visualizer. The Masking process takes place under the “Draw” tab. Before applying products to your clients home, you must mask the image to define various layers of the home. 

Before you get started, keep in mind that the software works in layers – what you mask first will appear as the bottom most layer. After that, each mask will go on top of the previous layer.

This rule applies to everything except doors and windows. They will appear on top of all the layers (except foreground) automatically. We recommend that you plan the order in which you will do the Masking before you get started. Eventually this will become second nature!

It can look something like this:

• Siding
• Masonry
• Roof
• Trim
• Windows
• Doors
• Foreground

A few things that will be good to know when you start:

• To mask an area you have to first select the category it fits under
• To start masking you will have to draw around the perimeter of an area clicking every time you want to change direction and ending where you started to complete a layer
• Every point you clicked on to change direction is movable, so don’t worry if your lines aren’t straight

Masking is the process of tracing or defining different surfaces of the house that you will apply your selected product and designs. You can do so under the ‘Draw’ tab. To learn more about Masking, watch this video. Alternatively, you can also book a one – on – one Quickstart Session with your Customer Success Ambassador here. 

. If you want to know more about this, call our support line at +1 877 980 3880, email us at support@renoworks.com, or speak to someone from the  Renoworks Pro Customer Success team on LiveChat.

Your time is a valuable thing. Renoworks offers ‘Design Services’ to help prepare your images, so you can focus on delivering exceptional quality and service to homeowners. To get started, go to www.renoworkspro.com/designrequest

You can customize your Renoworks Pro Visualizer in many ways! Several features you can customize are:

• Product types
• Manufacturers
• Product ranges within manufacturers
• Colors within product ranges
• Company Branding such as logo and color of buttons

To customize your Renoworks Pro Visualizer, please call our support line at +1 877 980 3880, email us at support@renoworks.com, or speak to someone from the  Renoworks Pro Customer Success team on LiveChat.

The ‘Paint’ library includes paint as well as trim manufacturers. To get access to the Paint library, you can also draw the surface as a wall.

The Renoworks Pro Visualizer library has a few overlaps. The ‘Trim’ library is the same as the Paint library and includes Trim options from some manufacturers like ABC seamless, Alside, Continental Manufacturing, Exterior Portfolio, James Hardie, Mitten. The Trim library right now is great to show your clients what the Trim color will look like on their house. If you draw the Trim as ‘Paint’ or ‘Wall’ you will get access to the same library because of the overlap.

The Renoworks Pro Visualizer library has a few overlaps.

The ‘Wall’ Library includes manufacturers within:

• Siding
• Paint
• Masonry

Sometime the settings on your email will block your Renoworks Pro Visualizer from creating a pop up with the link in the email to share with your clients or colleagues.

A quick fix for this:

• Go to the ‘Save & Review’ tab of your client’s project
• Copy the URL on the top of the browser
• Paste it in an email body and its ready to send to your client

To share the Renoworks Pro Visualizer with your clients:

• Go to the ‘Save & Review’ tab of your client’s project.
• Copy the URL on the top of the browser
• Paste it in an email body and send it to your client.

NOTE: Because your client does not have an account with Renoworks, they will only have access to view the “Visualize” and “Save & review” tabs.

Don’t forget you can customise any of the features before you share the visualizer with your client.

To save the presentation style Before and After version of your project:

• Click on “Print”
• Click on “Print Page” on the top left corner of the pop up window. This will generate another popup.
• On the pop up, hit “Print” again. This command will prompt you to save the presentation on your computer.
• Select the location you would like to save it under and you can now access the presentation style before and after photo from your computer.

You may then email this image to your customers.

To save the ‘Image Only’ format of your project:

• Click on  “Save & Review”.
• Click on “Print” and a pop-up will appear in a presentation format where there will be Before & After Presentation style of your project
• Right click on the image you want to save
• Click on “save image as”. This will enable you to select a location on your computer to save this design. It will be saved as a .JPG file

You may then email this image to your customers, add it to your website, a custom presentation or use it to create content for your social media channels or newsletters.

To save the presentation style before and after version of your project:

• Got to the ‘Save & Review’ tab
• Click on “Print”
• Click on “Print Page” on the top left corner of the pop up window. This will generate another popup.
• On the pop up, hit “Print” again while making sure the destination says PDF. This command will prompt you to save the presentation on your computer.
• Select the location you would like to save it under and you can now access the presentation style before and after photo from your computer.

You may then email this image to your customers, add it to your website, a custom presentation or use it to create content for your social media channels or newsletters.

You can print or save your designs as one of two styles:

1. Presentation Style (Before & After) in PDF

1. 1. Go to your Renoworks Pro Visualizer
   2. Click on “Projects” on your home screen
   3. Click on the project you would like to print to PDF
   4. Go to the “Save & Review” tab
   5. Click on “Print” and then “Print Page” on the top left corner of the pop up window
   6. This will generate another popup. Find the ‘Destination’ of this printer and make sure it says PDF and not the name of a printer
   7. This command will prompt you to save the presentation on your computer.
   8. Select the location you would like to save it under and save

1. Image Only Style in .JPEG
   1. Go to the “Save & Review” tab
   2. Click on “Print” and a pop-up will appear in a presentation format where there will be Before & After presentation style layout of your project.
   3. Right click on the image you want to save
   4. Click on “save image as”. This will enable you to select a location on your computer to save this design. It will be saved as a .JPG file.

You may then email this image to your client or team member, add it to a custom presentation or use it to create content for your website, social media channels or newsletters.

To save a design to your visualizer :

• Go to the “Save & Review” tab
• Find “Save to my account” on the left side of the page.

You can access these saved projects anytime under ‘Projects’ on the home page.

To learn how to save a .JPEG of your design to your computer, here. To learn how to save a presentation style ‘Before & After’ PDF of your design, click here.

To print your Renoworks Pro designs:

1. Go to your Renoworks Pro Visualizer
2. Click on “Projects” on your home screen
3. Click on the project you would like to print
4. Go to the “Save & Review” tab
5. Click on ‘Print’ (Left side of the page) and follow the instructions.

To print multiple snapshots in the same presentation format, look at the instructions under “Save, view & print snapshots” (link) 

When you upload a photo, before you can start masking, the software will ask you to ‘Set Scale’. The scale helps the software understand how close or away you were from the house when you took the photo.

To set the scale, indicate the real life height of any given object of the house – for example, a door, window or the height of the house itself.

Do this by clicking on the top part of the object you are measuring (Point A), drawing a vertical line down and click on the bottom (Point B) to complete the measurement. The default scale is set to that of  a door at 6’ 8” however you have the option to adjust  the scale to define the height of whatever object you have selected. Make sure the line you draw is straight.

If you do not set the scale correctly, the products you want to apply to the home will not show correctly.

The foreground tool is used when something is obstructing the structure you are masking eg. Trees, mail boxes, bushes, fences, light bulbs, flowerpots  etc.. The foreground will act as the topmost layer of the design. The foreground tool allows you to mask anything that your visualizer should keep on top of the image. We suggest zooming into the object you want to mask as foreground so you can really concentrate on the details clicking as many times as you need to change direction to define the shape of the object you are trying to make foreground.

To share different options of the same project with your client, the snapshots tool will come in handy while sharing different design options with your Homeowners. Read about;

 What are Snapshots

How To Use Snapshots 

Save, View and Print Snapshots

• Go to the ‘Visualize tab
• Find the camera button (below the image) and click on one of the Snapshots you have taken.
• This will enlarge the snapshot image roll and allow you to select more than one. Once you select the ones you want to compare, hit “Compare Selected”
• You will then see a popup in a presentation style along with the before image.
• To see how to save this, read the section under ‘Saving & Sharing Designs”

Saved projects can be found under the ‘saved project’ on the homepage of your Renoworks Pro Visualizer. Snapshots enable you to change the Masking on a project while keeping the original masking version intact. You can save up to 10 Snapshots under each project in your account. Find the Snapshots (camera button) option under the “Visualize” tab.

The Snapshot tool helps you:

1. Provide customers with choice of products and how they look
2. Provide customers with options where the masking will require minor changes like in this example (Link to example above)
3. Compare products when your customers are confused or not able to make up their mind. Here is how you can save, view and print snapshots (Link to  Save, View and Print Snapshots)

Here is an example of a house to understand how to use the Snapshot tool better. Say you have to provide a customer with 2 options on an existing siding you will be replacing.

Option 1: Siding only

Option 2 : Siding with masonry kneeboard

To achieve option 1:

• Go to “draw” tab and mask the siding
• Set perspective
• Now go to “Visualize” and click on the little camera button and take a “Snapshot”

Option 2:

• You can now go back to the “Draw” tab and add an additional layer where you want the masonry kneeboard
• Now go back to “Visualize” tab, add the masonry option you likeand take a second “Snapshot”

You can now switch between the snapshots and play around with different options for each.

Don’t forget to save the project under “Save & Review”. Each saved project can have upto to 10 snapshots. This tool enables you to provide options or make versatile presentations to your customers. If you add the 11th snapshot when only 10 can be saves, it will over write snapshot no.1. You may save as many designs of each snapshot as you like to your computer.

To compare different options within a project, use the snapshot tool. Read more about;

What are Snapshots

How to use Snapshots

You set perspective to a layer by masking it under the “Draw” tab which will enable a set of new options on the left side of the page once the layer has been drawn. You can change, edit or reset the perspective of any layer at any time by going back to the “Draw” tab and clicking on the layer, you will then see the ‘Set Perspective’ option on the left. 

The Perspective tool lets the software know the angle of any surface. You need to set perspective for all siding and roofing. Any surface that is sloping or slanting.

The perspective tool is the most important tool while working on any elements with an angle (sloping or slanted). You must ALWAYS set perspective to siding and roofing layers. This tool allows your visualizer to know what angle the element is in and how close or further away it might be from where the photo was taken.

The Trim library is currently under the ‘Paint’ library in your Renoworks Pro Visualizer. You can read more about overlap of libraries here. Adding trim should be done at the right stage of the Masking process as the software works in layers (link).

The right time to work on Trim is after you have masked the siding and before you mask the windows (Just like you would on a real job!) Using the paint, trim or wall tool follow these steps:

1. Draw a square or rectangle beyond the window to the thickness you would like your trim to be.
2. Cut out the window
3. Go to the ‘Visualize’ tab and you can apply different paint colours to represent the trim.

The window will always apply as the top most layer and all you will see is the colour around the window looking like the trim.

Under the ‘Visualize’ tab, on the left side of the page you will find a red button with a wheel next to the search bar, you can select any color which will let you view all the products within a certain colour category.

The process of uploading an image and designing it is called Masking in your Renoworks Pro Visualizer. The Masking process takes place under the “Draw” tab. Before applying products to your clients home, you must mask the image to define various layers of the home. 

Before you get started, keep in mind that the software works in layers – what you mask first will appear as the bottom most layer. After that, each mask will go on top of the previous layer.

This rule applies to everything except doors and windows. They will appear on top of all the layers (except foreground) automatically. We recommend that you plan the order in which you will do the Masking before you get started. Eventually this will become second nature!

It can look something like this:

• Siding
• Masonry
• Roof
• Trim
• Windows
• Doors
• Foreground

A few things that will be good to know when you start:

• To mask an area you have to first select the category it fits under
• To start masking you will have to draw around the perimeter of an area clicking every time you want to change direction and ending where you started to complete a layer
• Every point you clicked on to change direction is movable, so don’t worry if your lines aren’t straight

Masking is the process of tracing or defining different surfaces of the house that you will apply your selected product and designs. You can do so under the ‘Draw’ tab. To learn more about Masking, watch this video. Alternatively, you can also book a one – on – one Quickstart Session with your Customer Success Ambassador here. 

. If you want to know more about this, call our support line at +1 877 980 3880, email us at support@renoworks.com, or speak to someone from the  Renoworks Pro Customer Success team on LiveChat.

Your time is a valuable thing. Renoworks offers ‘Design Services’ to help prepare your images, so you can focus on delivering exceptional quality and service to homeowners. To get started, go to www.renoworkspro.com/designrequest

You can customize your Renoworks Pro Visualizer in many ways! Several features you can customize are:

• Product types
• Manufacturers
• Product ranges within manufacturers
• Colors within product ranges
• Company Branding such as logo and color of buttons

To customize your Renoworks Pro Visualizer, please call our support line at +1 877 980 3880, email us at support@renoworks.com, or speak to someone from the  Renoworks Pro Customer Success team on LiveChat.

The ‘Paint’ library includes paint as well as trim manufacturers. To get access to the Paint library, you can also draw the surface as a wall.

The Renoworks Pro Visualizer library has a few overlaps. The ‘Trim’ library is the same as the Paint library and includes Trim options from some manufacturers like ABC seamless, Alside, Continental Manufacturing, Exterior Portfolio, James Hardie, Mitten. The Trim library right now is great to show your clients what the Trim color will look like on their house. If you draw the Trim as ‘Paint’ or ‘Wall’ you will get access to the same library because of the overlap.

The Renoworks Pro Visualizer library has a few overlaps.

The ‘Wall’ Library includes manufacturers within:

• Siding
• Paint
• Masonry

Sometime the settings on your email will block your Renoworks Pro Visualizer from creating a pop up with the link in the email to share with your clients or colleagues.

A quick fix for this:

• Go to the ‘Save & Review’ tab of your client’s project
• Copy the URL on the top of the browser
• Paste it in an email body and its ready to send to your client

To share the Renoworks Pro Visualizer with your clients:

• Go to the ‘Save & Review’ tab of your client’s project.
• Copy the URL on the top of the browser
• Paste it in an email body and send it to your client.

NOTE: Because your client does not have an account with Renoworks, they will only have access to view the “Visualize” and “Save & review” tabs.

Don’t forget you can customise any of the features before you share the visualizer with your client.

To save the presentation style Before and After version of your project:

• Click on “Print”
• Click on “Print Page” on the top left corner of the pop up window. This will generate another popup.
• On the pop up, hit “Print” again. This command will prompt you to save the presentation on your computer.
• Select the location you would like to save it under and you can now access the presentation style before and after photo from your computer.

You may then email this image to your customers.

To save the ‘Image Only’ format of your project:

• Click on  “Save & Review”.
• Click on “Print” and a pop-up will appear in a presentation format where there will be Before & After Presentation style of your project
• Right click on the image you want to save
• Click on “save image as”. This will enable you to select a location on your computer to save this design. It will be saved as a .JPG file

You may then email this image to your customers, add it to your website, a custom presentation or use it to create content for your social media channels or newsletters.

To save the presentation style before and after version of your project:

• Got to the ‘Save & Review’ tab
• Click on “Print”
• Click on “Print Page” on the top left corner of the pop up window. This will generate another popup.
• On the pop up, hit “Print” again while making sure the destination says PDF. This command will prompt you to save the presentation on your computer.
• Select the location you would like to save it under and you can now access the presentation style before and after photo from your computer.

You may then email this image to your customers, add it to your website, a custom presentation or use it to create content for your social media channels or newsletters.

You can print or save your designs as one of two styles:

1. Presentation Style (Before & After) in PDF

1. 1. Go to your Renoworks Pro Visualizer
   2. Click on “Projects” on your home screen
   3. Click on the project you would like to print to PDF
   4. Go to the “Save & Review” tab
   5. Click on “Print” and then “Print Page” on the top left corner of the pop up window
   6. This will generate another popup. Find the ‘Destination’ of this printer and make sure it says PDF and not the name of a printer
   7. This command will prompt you to save the presentation on your computer.
   8. Select the location you would like to save it under and save

1. Image Only Style in .JPEG
   1. Go to the “Save & Review” tab
   2. Click on “Print” and a pop-up will appear in a presentation format where there will be Before & After presentation style layout of your project.
   3. Right click on the image you want to save
   4. Click on “save image as”. This will enable you to select a location on your computer to save this design. It will be saved as a .JPG file.

You may then email this image to your client or team member, add it to a custom presentation or use it to create content for your website, social media channels or newsletters.

To save a design to your visualizer :

• Go to the “Save & Review” tab
• Find “Save to my account” on the left side of the page.

You can access these saved projects anytime under ‘Projects’ on the home page.

To learn how to save a .JPEG of your design to your computer, here. To learn how to save a presentation style ‘Before & After’ PDF of your design, click here.

To print your Renoworks Pro designs:

1. Go to your Renoworks Pro Visualizer
2. Click on “Projects” on your home screen
3. Click on the project you would like to print
4. Go to the “Save & Review” tab
5. Click on ‘Print’ (Left side of the page) and follow the instructions.

To print multiple snapshots in the same presentation format, look at the instructions under “Save, view & print snapshots” (link) 

When you upload a photo, before you can start masking, the software will ask you to ‘Set Scale’. The scale helps the software understand how close or away you were from the house when you took the photo.

To set the scale, indicate the real life height of any given object of the house – for example, a door, window or the height of the house itself.

Do this by clicking on the top part of the object you are measuring (Point A), drawing a vertical line down and click on the bottom (Point B) to complete the measurement. The default scale is set to that of  a door at 6’ 8” however you have the option to adjust  the scale to define the height of whatever object you have selected. Make sure the line you draw is straight.

If you do not set the scale correctly, the products you want to apply to the home will not show correctly.

The foreground tool is used when something is obstructing the structure you are masking eg. Trees, mail boxes, bushes, fences, light bulbs, flowerpots  etc.. The foreground will act as the topmost layer of the design. The foreground tool allows you to mask anything that your visualizer should keep on top of the image. We suggest zooming into the object you want to mask as foreground so you can really concentrate on the details clicking as many times as you need to change direction to define the shape of the object you are trying to make foreground.

To share different options of the same project with your client, the snapshots tool will come in handy while sharing different design options with your Homeowners. Read about;

 What are Snapshots

How To Use Snapshots 

Save, View and Print Snapshots

• Go to the ‘Visualize tab
• Find the camera button (below the image) and click on one of the Snapshots you have taken.
• This will enlarge the snapshot image roll and allow you to select more than one. Once you select the ones you want to compare, hit “Compare Selected”
• You will then see a popup in a presentation style along with the before image.
• To see how to save this, read the section under ‘Saving & Sharing Designs”

Saved projects can be found under the ‘saved project’ on the homepage of your Renoworks Pro Visualizer. Snapshots enable you to change the Masking on a project while keeping the original masking version intact. You can save up to 10 Snapshots under each project in your account. Find the Snapshots (camera button) option under the “Visualize” tab.

The Snapshot tool helps you:

1. Provide customers with choice of products and how they look
2. Provide customers with options where the masking will require minor changes like in this example (Link to example above)
3. Compare products when your customers are confused or not able to make up their mind. Here is how you can save, view and print snapshots (Link to  Save, View and Print Snapshots)

Here is an example of a house to understand how to use the Snapshot tool better. Say you have to provide a customer with 2 options on an existing siding you will be replacing.

Option 1: Siding only

Option 2 : Siding with masonry kneeboard

To achieve option 1:

• Go to “draw” tab and mask the siding
• Set perspective
• Now go to “Visualize” and click on the little camera button and take a “Snapshot”

Option 2:

• You can now go back to the “Draw” tab and add an additional layer where you want the masonry kneeboard
• Now go back to “Visualize” tab, add the masonry option you likeand take a second “Snapshot”

You can now switch between the snapshots and play around with different options for each.

Don’t forget to save the project under “Save & Review”. Each saved project can have upto to 10 snapshots. This tool enables you to provide options or make versatile presentations to your customers. If you add the 11th snapshot when only 10 can be saves, it will over write snapshot no.1. You may save as many designs of each snapshot as you like to your computer.

To compare different options within a project, use the snapshot tool. Read more about;

What are Snapshots

How to use Snapshots

You set perspective to a layer by masking it under the “Draw” tab which will enable a set of new options on the left side of the page once the layer has been drawn. You can change, edit or reset the perspective of any layer at any time by going back to the “Draw” tab and clicking on the layer, you will then see the ‘Set Perspective’ option on the left. 

The Perspective tool lets the software know the angle of any surface. You need to set perspective for all siding and roofing. Any surface that is sloping or slanting.

The perspective tool is the most important tool while working on any elements with an angle (sloping or slanted). You must ALWAYS set perspective to siding and roofing layers. This tool allows your visualizer to know what angle the element is in and how close or further away it might be from where the photo was taken.

The Trim library is currently under the ‘Paint’ library in your Renoworks Pro Visualizer. You can read more about overlap of libraries here. Adding trim should be done at the right stage of the Masking process as the software works in layers (link).

The right time to work on Trim is after you have masked the siding and before you mask the windows (Just like you would on a real job!) Using the paint, trim or wall tool follow these steps:

1. Draw a square or rectangle beyond the window to the thickness you would like your trim to be.
2. Cut out the window
3. Go to the ‘Visualize’ tab and you can apply different paint colours to represent the trim.

The window will always apply as the top most layer and all you will see is the colour around the window looking like the trim.

Under the ‘Visualize’ tab, on the left side of the page you will find a red button with a wheel next to the search bar, you can select any color which will let you view all the products within a certain colour category.

The process of uploading an image and designing it is called Masking in your Renoworks Pro Visualizer. The Masking process takes place under the “Draw” tab. Before applying products to your clients home, you must mask the image to define various layers of the home. 

Before you get started, keep in mind that the software works in layers – what you mask first will appear as the bottom most layer. After that, each mask will go on top of the previous layer.

This rule applies to everything except doors and windows. They will appear on top of all the layers (except foreground) automatically. We recommend that you plan the order in which you will do the Masking before you get started. Eventually this will become second nature!

It can look something like this:

• Siding
• Masonry
• Roof
• Trim
• Windows
• Doors
• Foreground

A few things that will be good to know when you start:

• To mask an area you have to first select the category it fits under
• To start masking you will have to draw around the perimeter of an area clicking every time you want to change direction and ending where you started to complete a layer
• Every point you clicked on to change direction is movable, so don’t worry if your lines aren’t straight

Masking is the process of tracing or defining different surfaces of the house that you will apply your selected product and designs. You can do so under the ‘Draw’ tab. To learn more about Masking, watch this video. Alternatively, you can also book a one – on – one Quickstart Session with your Customer Success Ambassador here. 

. If you want to know more about this, call our support line at +1 877 980 3880, email us at support@renoworks.com, or speak to someone from the  Renoworks Pro Customer Success team on LiveChat.

Your time is a valuable thing. Renoworks offers ‘Design Services’ to help prepare your images, so you can focus on delivering exceptional quality and service to homeowners. To get started, go to www.renoworkspro.com/designrequest

You can customize your Renoworks Pro Visualizer in many ways! Several features you can customize are:

• Product types
• Manufacturers
• Product ranges within manufacturers
• Colors within product ranges
• Company Branding such as logo and color of buttons

To customize your Renoworks Pro Visualizer, please call our support line at +1 877 980 3880, email us at support@renoworks.com, or speak to someone from the  Renoworks Pro Customer Success team on LiveChat.

The ‘Paint’ library includes paint as well as trim manufacturers. To get access to the Paint library, you can also draw the surface as a wall.

The Renoworks Pro Visualizer library has a few overlaps. The ‘Trim’ library is the same as the Paint library and includes Trim options from some manufacturers like ABC seamless, Alside, Continental Manufacturing, Exterior Portfolio, James Hardie, Mitten. The Trim library right now is great to show your clients what the Trim color will look like on their house. If you draw the Trim as ‘Paint’ or ‘Wall’ you will get access to the same library because of the overlap.

The Renoworks Pro Visualizer library has a few overlaps.

The ‘Wall’ Library includes manufacturers within:

• Siding
• Paint
• Masonry

Sometime the settings on your email will block your Renoworks Pro Visualizer from creating a pop up with the link in the email to share with your clients or colleagues.

A quick fix for this:

• Go to the ‘Save & Review’ tab of your client’s project
• Copy the URL on the top of the browser
• Paste it in an email body and its ready to send to your client

To share the Renoworks Pro Visualizer with your clients:

• Go to the ‘Save & Review’ tab of your client’s project.
• Copy the URL on the top of the browser
• Paste it in an email body and send it to your client.

NOTE: Because your client does not have an account with Renoworks, they will only have access to view the “Visualize” and “Save & review” tabs.

Don’t forget you can customise any of the features before you share the visualizer with your client.

To save the presentation style Before and After version of your project:

• Click on “Print”
• Click on “Print Page” on the top left corner of the pop up window. This will generate another popup.
• On the pop up, hit “Print” again. This command will prompt you to save the presentation on your computer.
• Select the location you would like to save it under and you can now access the presentation style before and after photo from your computer.

You may then email this image to your customers.

To save the ‘Image Only’ format of your project:

• Click on  “Save & Review”.
• Click on “Print” and a pop-up will appear in a presentation format where there will be Before & After Presentation style of your project
• Right click on the image you want to save
• Click on “save image as”. This will enable you to select a location on your computer to save this design. It will be saved as a .JPG file

You may then email this image to your customers, add it to your website, a custom presentation or use it to create content for your social media channels or newsletters.

To save the presentation style before and after version of your project:

• Got to the ‘Save & Review’ tab
• Click on “Print”
• Click on “Print Page” on the top left corner of the pop up window. This will generate another popup.
• On the pop up, hit “Print” again while making sure the destination says PDF. This command will prompt you to save the presentation on your computer.
• Select the location you would like to save it under and you can now access the presentation style before and after photo from your computer.

You may then email this image to your customers, add it to your website, a custom presentation or use it to create content for your social media channels or newsletters.

You can print or save your designs as one of two styles:

1. Presentation Style (Before & After) in PDF

1. 1. Go to your Renoworks Pro Visualizer
   2. Click on “Projects” on your home screen
   3. Click on the project you would like to print to PDF
   4. Go to the “Save & Review” tab
   5. Click on “Print” and then “Print Page” on the top left corner of the pop up window
   6. This will generate another popup. Find the ‘Destination’ of this printer and make sure it says PDF and not the name of a printer
   7. This command will prompt you to save the presentation on your computer.
   8. Select the location you would like to save it under and save

1. Image Only Style in .JPEG
   1. Go to the “Save & Review” tab
   2. Click on “Print” and a pop-up will appear in a presentation format where there will be Before & After presentation style layout of your project.
   3. Right click on the image you want to save
   4. Click on “save image as”. This will enable you to select a location on your computer to save this design. It will be saved as a .JPG file.

You may then email this image to your client or team member, add it to a custom presentation or use it to create content for your website, social media channels or newsletters.

To save a design to your visualizer :

• Go to the “Save & Review” tab
• Find “Save to my account” on the left side of the page.

You can access these saved projects anytime under ‘Projects’ on the home page.

To learn how to save a .JPEG of your design to your computer, here. To learn how to save a presentation style ‘Before & After’ PDF of your design, click here.

To print your Renoworks Pro designs:

1. Go to your Renoworks Pro Visualizer
2. Click on “Projects” on your home screen
3. Click on the project you would like to print
4. Go to the “Save & Review” tab
5. Click on ‘Print’ (Left side of the page) and follow the instructions.

To print multiple snapshots in the same presentation format, look at the instructions under “Save, view & print snapshots” (link) 

When you upload a photo, before you can start masking, the software will ask you to ‘Set Scale’. The scale helps the software understand how close or away you were from the house when you took the photo.

To set the scale, indicate the real life height of any given object of the house – for example, a door, window or the height of the house itself.

Do this by clicking on the top part of the object you are measuring (Point A), drawing a vertical line down and click on the bottom (Point B) to complete the measurement. The default scale is set to that of  a door at 6’ 8” however you have the option to adjust  the scale to define the height of whatever object you have selected. Make sure the line you draw is straight.

If you do not set the scale correctly, the products you want to apply to the home will not show correctly.

The foreground tool is used when something is obstructing the structure you are masking eg. Trees, mail boxes, bushes, fences, light bulbs, flowerpots  etc.. The foreground will act as the topmost layer of the design. The foreground tool allows you to mask anything that your visualizer should keep on top of the image. We suggest zooming into the object you want to mask as foreground so you can really concentrate on the details clicking as many times as you need to change direction to define the shape of the object you are trying to make foreground.

To share different options of the same project with your client, the snapshots tool will come in handy while sharing different design options with your Homeowners. Read about;

 What are Snapshots

How To Use Snapshots 

Save, View and Print Snapshots

• Go to the ‘Visualize tab
• Find the camera button (below the image) and click on one of the Snapshots you have taken.
• This will enlarge the snapshot image roll and allow you to select more than one. Once you select the ones you want to compare, hit “Compare Selected”
• You will then see a popup in a presentation style along with the before image.
• To see how to save this, read the section under ‘Saving & Sharing Designs”

Saved projects can be found under the ‘saved project’ on the homepage of your Renoworks Pro Visualizer. Snapshots enable you to change the Masking on a project while keeping the original masking version intact. You can save up to 10 Snapshots under each project in your account. Find the Snapshots (camera button) option under the “Visualize” tab.

The Snapshot tool helps you:

1. Provide customers with choice of products and how they look
2. Provide customers with options where the masking will require minor changes like in this example (Link to example above)
3. Compare products when your customers are confused or not able to make up their mind. Here is how you can save, view and print snapshots (Link to  Save, View and Print Snapshots)

Here is an example of a house to understand how to use the Snapshot tool better. Say you have to provide a customer with 2 options on an existing siding you will be replacing.

Option 1: Siding only

Option 2 : Siding with masonry kneeboard

To achieve option 1:

• Go to “draw” tab and mask the siding
• Set perspective
• Now go to “Visualize” and click on the little camera button and take a “Snapshot”

Option 2:

• You can now go back to the “Draw” tab and add an additional layer where you want the masonry kneeboard
• Now go back to “Visualize” tab, add the masonry option you likeand take a second “Snapshot”

You can now switch between the snapshots and play around with different options for each.

Don’t forget to save the project under “Save & Review”. Each saved project can have upto to 10 snapshots. This tool enables you to provide options or make versatile presentations to your customers. If you add the 11th snapshot when only 10 can be saves, it will over write snapshot no.1. You may save as many designs of each snapshot as you like to your computer.

To compare different options within a project, use the snapshot tool. Read more about;

What are Snapshots

How to use Snapshots

You set perspective to a layer by masking it under the “Draw” tab which will enable a set of new options on the left side of the page once the layer has been drawn. You can change, edit or reset the perspective of any layer at any time by going back to the “Draw” tab and clicking on the layer, you will then see the ‘Set Perspective’ option on the left. 

The Perspective tool lets the software know the angle of any surface. You need to set perspective for all siding and roofing. Any surface that is sloping or slanting.

The perspective tool is the most important tool while working on any elements with an angle (sloping or slanted). You must ALWAYS set perspective to siding and roofing layers. This tool allows your visualizer to know what angle the element is in and how close or further away it might be from where the photo was taken.

The Trim library is currently under the ‘Paint’ library in your Renoworks Pro Visualizer. You can read more about overlap of libraries here. Adding trim should be done at the right stage of the Masking process as the software works in layers (link).

The right time to work on Trim is after you have masked the siding and before you mask the windows (Just like you would on a real job!) Using the paint, trim or wall tool follow these steps:

1. Draw a square or rectangle beyond the window to the thickness you would like your trim to be.
2. Cut out the window
3. Go to the ‘Visualize’ tab and you can apply different paint colours to represent the trim.

The window will always apply as the top most layer and all you will see is the colour around the window looking like the trim.

Under the ‘Visualize’ tab, on the left side of the page you will find a red button with a wheel next to the search bar, you can select any color which will let you view all the products within a certain colour category.

The process of uploading an image and designing it is called Masking in your Renoworks Pro Visualizer. The Masking process takes place under the “Draw” tab. Before applying products to your clients home, you must mask the image to define various layers of the home. 

Before you get started, keep in mind that the software works in layers – what you mask first will appear as the bottom most layer. After that, each mask will go on top of the previous layer.

This rule applies to everything except doors and windows. They will appear on top of all the layers (except foreground) automatically. We recommend that you plan the order in which you will do the Masking before you get started. Eventually this will become second nature!

It can look something like this:

• Siding
• Masonry
• Roof
• Trim
• Windows
• Doors
• Foreground

A few things that will be good to know when you start:

• To mask an area you have to first select the category it fits under
• To start masking you will have to draw around the perimeter of an area clicking every time you want to change direction and ending where you started to complete a layer
• Every point you clicked on to change direction is movable, so don’t worry if your lines aren’t straight

Masking is the process of tracing or defining different surfaces of the house that you will apply your selected product and designs. You can do so under the ‘Draw’ tab. To learn more about Masking, watch this video. Alternatively, you can also book a one – on – one Quickstart Session with your Customer Success Ambassador here. 

. If you want to know more about this, call our support line at +1 877 980 3880, email us at support@renoworks.com, or speak to someone from the  Renoworks Pro Customer Success team on LiveChat.

Your time is a valuable thing. Renoworks offers ‘Design Services’ to help prepare your images, so you can focus on delivering exceptional quality and service to homeowners. To get started, go to www.renoworkspro.com/designrequest

You can customize your Renoworks Pro Visualizer in many ways! Several features you can customize are:

• Product types
• Manufacturers
• Product ranges within manufacturers
• Colors within product ranges
• Company Branding such as logo and color of buttons

To customize your Renoworks Pro Visualizer, please call our support line at +1 877 980 3880, email us at support@renoworks.com, or speak to someone from the  Renoworks Pro Customer Success team on LiveChat.

The ‘Paint’ library includes paint as well as trim manufacturers. To get access to the Paint library, you can also draw the surface as a wall.

The Renoworks Pro Visualizer library has a few overlaps. The ‘Trim’ library is the same as the Paint library and includes Trim options from some manufacturers like ABC seamless, Alside, Continental Manufacturing, Exterior Portfolio, James Hardie, Mitten. The Trim library right now is great to show your clients what the Trim color will look like on their house. If you draw the Trim as ‘Paint’ or ‘Wall’ you will get access to the same library because of the overlap.

The Renoworks Pro Visualizer library has a few overlaps.

The ‘Wall’ Library includes manufacturers within:

• Siding
• Paint
• Masonry

Sometime the settings on your email will block your Renoworks Pro Visualizer from creating a pop up with the link in the email to share with your clients or colleagues.

A quick fix for this:

• Go to the ‘Save & Review’ tab of your client’s project
• Copy the URL on the top of the browser
• Paste it in an email body and its ready to send to your client

To share the Renoworks Pro Visualizer with your clients:

• Go to the ‘Save & Review’ tab of your client’s project.
• Copy the URL on the top of the browser
• Paste it in an email body and send it to your client.

NOTE: Because your client does not have an account with Renoworks, they will only have access to view the “Visualize” and “Save & review” tabs.

Don’t forget you can customise any of the features before you share the visualizer with your client.

To save the presentation style Before and After version of your project:

• Click on “Print”
• Click on “Print Page” on the top left corner of the pop up window. This will generate another popup.
• On the pop up, hit “Print” again. This command will prompt you to save the presentation on your computer.
• Select the location you would like to save it under and you can now access the presentation style before and after photo from your computer.

You may then email this image to your customers.

To save the ‘Image Only’ format of your project:

• Click on  “Save & Review”.
• Click on “Print” and a pop-up will appear in a presentation format where there will be Before & After Presentation style of your project
• Right click on the image you want to save
• Click on “save image as”. This will enable you to select a location on your computer to save this design. It will be saved as a .JPG file

You may then email this image to your customers, add it to your website, a custom presentation or use it to create content for your social media channels or newsletters.

To save the presentation style before and after version of your project:

• Got to the ‘Save & Review’ tab
• Click on “Print”
• Click on “Print Page” on the top left corner of the pop up window. This will generate another popup.
• On the pop up, hit “Print” again while making sure the destination says PDF. This command will prompt you to save the presentation on your computer.
• Select the location you would like to save it under and you can now access the presentation style before and after photo from your computer.

You may then email this image to your customers, add it to your website, a custom presentation or use it to create content for your social media channels or newsletters.

You can print or save your designs as one of two styles:

1. Presentation Style (Before & After) in PDF

1. 1. Go to your Renoworks Pro Visualizer
   2. Click on “Projects” on your home screen
   3. Click on the project you would like to print to PDF
   4. Go to the “Save & Review” tab
   5. Click on “Print” and then “Print Page” on the top left corner of the pop up window
   6. This will generate another popup. Find the ‘Destination’ of this printer and make sure it says PDF and not the name of a printer
   7. This command will prompt you to save the presentation on your computer.
   8. Select the location you would like to save it under and save

1. Image Only Style in .JPEG
   1. Go to the “Save & Review” tab
   2. Click on “Print” and a pop-up will appear in a presentation format where there will be Before & After presentation style layout of your project.
   3. Right click on the image you want to save
   4. Click on “save image as”. This will enable you to select a location on your computer to save this design. It will be saved as a .JPG file.

You may then email this image to your client or team member, add it to a custom presentation or use it to create content for your website, social media channels or newsletters.

To save a design to your visualizer :

• Go to the “Save & Review” tab
• Find “Save to my account” on the left side of the page.

You can access these saved projects anytime under ‘Projects’ on the home page.

To learn how to save a .JPEG of your design to your computer, here. To learn how to save a presentation style ‘Before & After’ PDF of your design, click here.

To print your Renoworks Pro designs:

1. Go to your Renoworks Pro Visualizer
2. Click on “Projects” on your home screen
3. Click on the project you would like to print
4. Go to the “Save & Review” tab
5. Click on ‘Print’ (Left side of the page) and follow the instructions.

To print multiple snapshots in the same presentation format, look at the instructions under “Save, view & print snapshots” (link) 

When you upload a photo, before you can start masking, the software will ask you to ‘Set Scale’. The scale helps the software understand how close or away you were from the house when you took the photo.

To set the scale, indicate the real life height of any given object of the house – for example, a door, window or the height of the house itself.

Do this by clicking on the top part of the object you are measuring (Point A), drawing a vertical line down and click on the bottom (Point B) to complete the measurement. The default scale is set to that of  a door at 6’ 8” however you have the option to adjust  the scale to define the height of whatever object you have selected. Make sure the line you draw is straight.

If you do not set the scale correctly, the products you want to apply to the home will not show correctly.

The foreground tool is used when something is obstructing the structure you are masking eg. Trees, mail boxes, bushes, fences, light bulbs, flowerpots  etc.. The foreground will act as the topmost layer of the design. The foreground tool allows you to mask anything that your visualizer should keep on top of the image. We suggest zooming into the object you want to mask as foreground so you can really concentrate on the details clicking as many times as you need to change direction to define the shape of the object you are trying to make foreground.

To share different options of the same project with your client, the snapshots tool will come in handy while sharing different design options with your Homeowners. Read about;

 What are Snapshots

How To Use Snapshots 

Save, View and Print Snapshots

• Go to the ‘Visualize tab
• Find the camera button (below the image) and click on one of the Snapshots you have taken.
• This will enlarge the snapshot image roll and allow you to select more than one. Once you select the ones you want to compare, hit “Compare Selected”
• You will then see a popup in a presentation style along with the before image.
• To see how to save this, read the section under ‘Saving & Sharing Designs”

Saved projects can be found under the ‘saved project’ on the homepage of your Renoworks Pro Visualizer. Snapshots enable you to change the Masking on a project while keeping the original masking version intact. You can save up to 10 Snapshots under each project in your account. Find the Snapshots (camera button) option under the “Visualize” tab.

The Snapshot tool helps you:

1. Provide customers with choice of products and how they look
2. Provide customers with options where the masking will require minor changes like in this example (Link to example above)
3. Compare products when your customers are confused or not able to make up their mind. Here is how you can save, view and print snapshots (Link to  Save, View and Print Snapshots)

Here is an example of a house to understand how to use the Snapshot tool better. Say you have to provide a customer with 2 options on an existing siding you will be replacing.

Option 1: Siding only

Option 2 : Siding with masonry kneeboard

To achieve option 1:

• Go to “draw” tab and mask the siding
• Set perspective
• Now go to “Visualize” and click on the little camera button and take a “Snapshot”

Option 2:

• You can now go back to the “Draw” tab and add an additional layer where you want the masonry kneeboard
• Now go back to “Visualize” tab, add the masonry option you likeand take a second “Snapshot”

You can now switch between the snapshots and play around with different options for each.

Don’t forget to save the project under “Save & Review”. Each saved project can have upto to 10 snapshots. This tool enables you to provide options or make versatile presentations to your customers. If you add the 11th snapshot when only 10 can be saves, it will over write snapshot no.1. You may save as many designs of each snapshot as you like to your computer.

To compare different options within a project, use the snapshot tool. Read more about;

What are Snapshots

How to use Snapshots

You set perspective to a layer by masking it under the “Draw” tab which will enable a set of new options on the left side of the page once the layer has been drawn. You can change, edit or reset the perspective of any layer at any time by going back to the “Draw” tab and clicking on the layer, you will then see the ‘Set Perspective’ option on the left. 

The Perspective tool lets the software know the angle of any surface. You need to set perspective for all siding and roofing. Any surface that is sloping or slanting.

The perspective tool is the most important tool while working on any elements with an angle (sloping or slanted). You must ALWAYS set perspective to siding and roofing layers. This tool allows your visualizer to know what angle the element is in and how close or further away it might be from where the photo was taken.

The Trim library is currently under the ‘Paint’ library in your Renoworks Pro Visualizer. You can read more about overlap of libraries here. Adding trim should be done at the right stage of the Masking process as the software works in layers (link).

The right time to work on Trim is after you have masked the siding and before you mask the windows (Just like you would on a real job!) Using the paint, trim or wall tool follow these steps:

1. Draw a square or rectangle beyond the window to the thickness you would like your trim to be.
2. Cut out the window
3. Go to the ‘Visualize’ tab and you can apply different paint colours to represent the trim.

The window will always apply as the top most layer and all you will see is the colour around the window looking like the trim.

Under the ‘Visualize’ tab, on the left side of the page you will find a red button with a wheel next to the search bar, you can select any color which will let you view all the products within a certain colour category.

The process of uploading an image and designing it is called Masking in your Renoworks Pro Visualizer. The Masking process takes place under the “Draw” tab. Before applying products to your clients home, you must mask the image to define various layers of the home. 

Before you get started, keep in mind that the software works in layers – what you mask first will appear as the bottom most layer. After that, each mask will go on top of the previous layer.

This rule applies to everything except doors and windows. They will appear on top of all the layers (except foreground) automatically. We recommend that you plan the order in which you will do the Masking before you get started. Eventually this will become second nature!

It can look something like this:

• Siding
• Masonry
• Roof
• Trim
• Windows
• Doors
• Foreground

A few things that will be good to know when you start:

• To mask an area you have to first select the category it fits under
• To start masking you will have to draw around the perimeter of an area clicking every time you want to change direction and ending where you started to complete a layer
• Every point you clicked on to change direction is movable, so don’t worry if your lines aren’t straight

Masking is the process of tracing or defining different surfaces of the house that you will apply your selected product and designs. You can do so under the ‘Draw’ tab. To learn more about Masking, watch this video. Alternatively, you can also book a one – on – one Quickstart Session with your Customer Success Ambassador here. 

. If you want to know more about this, call our support line at +1 877 980 3880, email us at support@renoworks.com, or speak to someone from the  Renoworks Pro Customer Success team on LiveChat.

Your time is a valuable thing. Renoworks offers ‘Design Services’ to help prepare your images, so you can focus on delivering exceptional quality and service to homeowners. To get started, go to www.renoworkspro.com/designrequest

You can customize your Renoworks Pro Visualizer in many ways! Several features you can customize are:

• Product types
• Manufacturers
• Product ranges within manufacturers
• Colors within product ranges
• Company Branding such as logo and color of buttons

To customize your Renoworks Pro Visualizer, please call our support line at +1 877 980 3880, email us at support@renoworks.com, or speak to someone from the  Renoworks Pro Customer Success team on LiveChat.

The ‘Paint’ library includes paint as well as trim manufacturers. To get access to the Paint library, you can also draw the surface as a wall.

The Renoworks Pro Visualizer library has a few overlaps. The ‘Trim’ library is the same as the Paint library and includes Trim options from some manufacturers like ABC seamless, Alside, Continental Manufacturing, Exterior Portfolio, James Hardie, Mitten. The Trim library right now is great to show your clients what the Trim color will look like on their house. If you draw the Trim as ‘Paint’ or ‘Wall’ you will get access to the same library because of the overlap.

The Renoworks Pro Visualizer library has a few overlaps.

The ‘Wall’ Library includes manufacturers within:

• Siding
• Paint
• Masonry

Sometime the settings on your email will block your Renoworks Pro Visualizer from creating a pop up with the link in the email to share with your clients or colleagues.

A quick fix for this:

• Go to the ‘Save & Review’ tab of your client’s project
• Copy the URL on the top of the browser
• Paste it in an email body and its ready to send to your client

To share the Renoworks Pro Visualizer with your clients:

• Go to the ‘Save & Review’ tab of your client’s project.
• Copy the URL on the top of the browser
• Paste it in an email body and send it to your client.

NOTE: Because your client does not have an account with Renoworks, they will only have access to view the “Visualize” and “Save & review” tabs.

Don’t forget you can customise any of the features before you share the visualizer with your client.

To save the presentation style Before and After version of your project:

• Click on “Print”
• Click on “Print Page” on the top left corner of the pop up window. This will generate another popup.
• On the pop up, hit “Print” again. This command will prompt you to save the presentation on your computer.
• Select the location you would like to save it under and you can now access the presentation style before and after photo from your computer.

You may then email this image to your customers.

To save the ‘Image Only’ format of your project:

• Click on  “Save & Review”.
• Click on “Print” and a pop-up will appear in a presentation format where there will be Before & After Presentation style of your project
• Right click on the image you want to save
• Click on “save image as”. This will enable you to select a location on your computer to save this design. It will be saved as a .JPG file

You may then email this image to your customers, add it to your website, a custom presentation or use it to create content for your social media channels or newsletters.

To save the presentation style before and after version of your project:

• Got to the ‘Save & Review’ tab
• Click on “Print”
• Click on “Print Page” on the top left corner of the pop up window. This will generate another popup.
• On the pop up, hit “Print” again while making sure the destination says PDF. This command will prompt you to save the presentation on your computer.
• Select the location you would like to save it under and you can now access the presentation style before and after photo from your computer.

You may then email this image to your customers, add it to your website, a custom presentation or use it to create content for your social media channels or newsletters.

You can print or save your designs as one of two styles:

1. Presentation Style (Before & After) in PDF

1. 1. Go to your Renoworks Pro Visualizer
   2. Click on “Projects” on your home screen
   3. Click on the project you would like to print to PDF
   4. Go to the “Save & Review” tab
   5. Click on “Print” and then “Print Page” on the top left corner of the pop up window
   6. This will generate another popup. Find the ‘Destination’ of this printer and make sure it says PDF and not the name of a printer
   7. This command will prompt you to save the presentation on your computer.
   8. Select the location you would like to save it under and save

1. Image Only Style in .JPEG
   1. Go to the “Save & Review” tab
   2. Click on “Print” and a pop-up will appear in a presentation format where there will be Before & After presentation style layout of your project.
   3. Right click on the image you want to save
   4. Click on “save image as”. This will enable you to select a location on your computer to save this design. It will be saved as a .JPG file.

You may then email this image to your client or team member, add it to a custom presentation or use it to create content for your website, social media channels or newsletters.

To save a design to your visualizer :

• Go to the “Save & Review” tab
• Find “Save to my account” on the left side of the page.

You can access these saved projects anytime under ‘Projects’ on the home page.

To learn how to save a .JPEG of your design to your computer, here. To learn how to save a presentation style ‘Before & After’ PDF of your design, click here.

To print your Renoworks Pro designs:

1. Go to your Renoworks Pro Visualizer
2. Click on “Projects” on your home screen
3. Click on the project you would like to print
4. Go to the “Save & Review” tab
5. Click on ‘Print’ (Left side of the page) and follow the instructions.

To print multiple snapshots in the same presentation format, look at the instructions under “Save, view & print snapshots” (link) 

When you upload a photo, before you can start masking, the software will ask you to ‘Set Scale’. The scale helps the software understand how close or away you were from the house when you took the photo.

To set the scale, indicate the real life height of any given object of the house – for example, a door, window or the height of the house itself.

Do this by clicking on the top part of the object you are measuring (Point A), drawing a vertical line down and click on the bottom (Point B) to complete the measurement. The default scale is set to that of  a door at 6’ 8” however you have the option to adjust  the scale to define the height of whatever object you have selected. Make sure the line you draw is straight.

If you do not set the scale correctly, the products you want to apply to the home will not show correctly.

The foreground tool is used when something is obstructing the structure you are masking eg. Trees, mail boxes, bushes, fences, light bulbs, flowerpots  etc.. The foreground will act as the topmost layer of the design. The foreground tool allows you to mask anything that your visualizer should keep on top of the image. We suggest zooming into the object you want to mask as foreground so you can really concentrate on the details clicking as many times as you need to change direction to define the shape of the object you are trying to make foreground.

To share different options of the same project with your client, the snapshots tool will come in handy while sharing different design options with your Homeowners. Read about;

 What are Snapshots

How To Use Snapshots 

Save, View and Print Snapshots

• Go to the ‘Visualize tab
• Find the camera button (below the image) and click on one of the Snapshots you have taken.
• This will enlarge the snapshot image roll and allow you to select more than one. Once you select the ones you want to compare, hit “Compare Selected”
• You will then see a popup in a presentation style along with the before image.
• To see how to save this, read the section under ‘Saving & Sharing Designs”

Saved projects can be found under the ‘saved project’ on the homepage of your Renoworks Pro Visualizer. Snapshots enable you to change the Masking on a project while keeping the original masking version intact. You can save up to 10 Snapshots under each project in your account. Find the Snapshots (camera button) option under the “Visualize” tab.

The Snapshot tool helps you:

1. Provide customers with choice of products and how they look
2. Provide customers with options where the masking will require minor changes like in this example (Link to example above)
3. Compare products when your customers are confused or not able to make up their mind. Here is how you can save, view and print snapshots (Link to  Save, View and Print Snapshots)

Here is an example of a house to understand how to use the Snapshot tool better. Say you have to provide a customer with 2 options on an existing siding you will be replacing.

Option 1: Siding only

Option 2 : Siding with masonry kneeboard

To achieve option 1:

• Go to “draw” tab and mask the siding
• Set perspective
• Now go to “Visualize” and click on the little camera button and take a “Snapshot”

Option 2:

• You can now go back to the “Draw” tab and add an additional layer where you want the masonry kneeboard
• Now go back to “Visualize” tab, add the masonry option you likeand take a second “Snapshot”

You can now switch between the snapshots and play around with different options for each.

Don’t forget to save the project under “Save & Review”. Each saved project can have upto to 10 snapshots. This tool enables you to provide options or make versatile presentations to your customers. If you add the 11th snapshot when only 10 can be saves, it will over write snapshot no.1. You may save as many designs of each snapshot as you like to your computer.

To compare different options within a project, use the snapshot tool. Read more about;

What are Snapshots

How to use Snapshots

You set perspective to a layer by masking it under the “Draw” tab which will enable a set of new options on the left side of the page once the layer has been drawn. You can change, edit or reset the perspective of any layer at any time by going back to the “Draw” tab and clicking on the layer, you will then see the ‘Set Perspective’ option on the left. 

The Perspective tool lets the software know the angle of any surface. You need to set perspective for all siding and roofing. Any surface that is sloping or slanting.

The perspective tool is the most important tool while working on any elements with an angle (sloping or slanted). You must ALWAYS set perspective to siding and roofing layers. This tool allows your visualizer to know what angle the element is in and how close or further away it might be from where the photo was taken.

The Trim library is currently under the ‘Paint’ library in your Renoworks Pro Visualizer. You can read more about overlap of libraries here. Adding trim should be done at the right stage of the Masking process as the software works in layers (link).

The right time to work on Trim is after you have masked the siding and before you mask the windows (Just like you would on a real job!) Using the paint, trim or wall tool follow these steps:

1. Draw a square or rectangle beyond the window to the thickness you would like your trim to be.
2. Cut out the window
3. Go to the ‘Visualize’ tab and you can apply different paint colours to represent the trim.

The window will always apply as the top most layer and all you will see is the colour around the window looking like the trim.

Under the ‘Visualize’ tab, on the left side of the page you will find a red button with a wheel next to the search bar, you can select any color which will let you view all the products within a certain colour category.

The process of uploading an image and designing it is called Masking in your Renoworks Pro Visualizer. The Masking process takes place under the “Draw” tab. Before applying products to your clients home, you must mask the image to define various layers of the home. 

Before you get started, keep in mind that the software works in layers – what you mask first will appear as the bottom most layer. After that, each mask will go on top of the previous layer.

This rule applies to everything except doors and windows. They will appear on top of all the layers (except foreground) automatically. We recommend that you plan the order in which you will do the Masking before you get started. Eventually this will become second nature!

It can look something like this:

• Siding
• Masonry
• Roof
• Trim
• Windows
• Doors
• Foreground

A few things that will be good to know when you start:

• To mask an area you have to first select the category it fits under
• To start masking you will have to draw around the perimeter of an area clicking every time you want to change direction and ending where you started to complete a layer
• Every point you clicked on to change direction is movable, so don’t worry if your lines aren’t straight

Masking is the process of tracing or defining different surfaces of the house that you will apply your selected product and designs. You can do so under the ‘Draw’ tab. To learn more about Masking, watch this video. Alternatively, you can also book a one – on – one Quickstart Session with your Customer Success Ambassador here. 

. If you want to know more about this, call our support line at +1 877 980 3880, email us at support@renoworks.com, or speak to someone from the  Renoworks Pro Customer Success team on LiveChat.

Your time is a valuable thing. Renoworks offers ‘Design Services’ to help prepare your images, so you can focus on delivering exceptional quality and service to homeowners. To get started, go to www.renoworkspro.com/designrequest

You can customize your Renoworks Pro Visualizer in many ways! Several features you can customize are:

• Product types
• Manufacturers
• Product ranges within manufacturers
• Colors within product ranges
• Company Branding such as logo and color of buttons

To customize your Renoworks Pro Visualizer, please call our support line at +1 877 980 3880, email us at support@renoworks.com, or speak to someone from the  Renoworks Pro Customer Success team on LiveChat.

The ‘Paint’ library includes paint as well as trim manufacturers. To get access to the Paint library, you can also draw the surface as a wall.

The Renoworks Pro Visualizer library has a few overlaps. The ‘Trim’ library is the same as the Paint library and includes Trim options from some manufacturers like ABC seamless, Alside, Continental Manufacturing, Exterior Portfolio, James Hardie, Mitten. The Trim library right now is great to show your clients what the Trim color will look like on their house. If you draw the Trim as ‘Paint’ or ‘Wall’ you will get access to the same library because of the overlap.

The Renoworks Pro Visualizer library has a few overlaps.

The ‘Wall’ Library includes manufacturers within:

• Siding
• Paint
• Masonry

Sometime the settings on your email will block your Renoworks Pro Visualizer from creating a pop up with the link in the email to share with your clients or colleagues.

A quick fix for this:

• Go to the ‘Save & Review’ tab of your client’s project
• Copy the URL on the top of the browser
• Paste it in an email body and its ready to send to your client

To share the Renoworks Pro Visualizer with your clients:

• Go to the ‘Save & Review’ tab of your client’s project.
• Copy the URL on the top of the browser
• Paste it in an email body and send it to your client.

NOTE: Because your client does not have an account with Renoworks, they will only have access to view the “Visualize” and “Save & review” tabs.

Don’t forget you can customise any of the features before you share the visualizer with your client.

To save the presentation style Before and After version of your project:

• Click on “Print”
• Click on “Print Page” on the top left corner of the pop up window. This will generate another popup.
• On the pop up, hit “Print” again. This command will prompt you to save the presentation on your computer.
• Select the location you would like to save it under and you can now access the presentation style before and after photo from your computer.

You may then email this image to your customers.

To save the ‘Image Only’ format of your project:

• Click on  “Save & Review”.
• Click on “Print” and a pop-up will appear in a presentation format where there will be Before & After Presentation style of your project
• Right click on the image you want to save
• Click on “save image as”. This will enable you to select a location on your computer to save this design. It will be saved as a .JPG file

You may then email this image to your customers, add it to your website, a custom presentation or use it to create content for your social media channels or newsletters.

To save the presentation style before and after version of your project:

• Got to the ‘Save & Review’ tab
• Click on “Print”
• Click on “Print Page” on the top left corner of the pop up window. This will generate another popup.
• On the pop up, hit “Print” again while making sure the destination says PDF. This command will prompt you to save the presentation on your computer.
• Select the location you would like to save it under and you can now access the presentation style before and after photo from your computer.

You may then email this image to your customers, add it to your website, a custom presentation or use it to create content for your social media channels or newsletters.

You can print or save your designs as one of two styles:

1. Presentation Style (Before & After) in PDF

1. 1. Go to your Renoworks Pro Visualizer
   2. Click on “Projects” on your home screen
   3. Click on the project you would like to print to PDF
   4. Go to the “Save & Review” tab
   5. Click on “Print” and then “Print Page” on the top left corner of the pop up window
   6. This will generate another popup. Find the ‘Destination’ of this printer and make sure it says PDF and not the name of a printer
   7. This command will prompt you to save the presentation on your computer.
   8. Select the location you would like to save it under and save

1. Image Only Style in .JPEG
   1. Go to the “Save & Review” tab
   2. Click on “Print” and a pop-up will appear in a presentation format where there will be Before & After presentation style layout of your project.
   3. Right click on the image you want to save
   4. Click on “save image as”. This will enable you to select a location on your computer to save this design. It will be saved as a .JPG file.

You may then email this image to your client or team member, add it to a custom presentation or use it to create content for your website, social media channels or newsletters.

To save a design to your visualizer :

• Go to the “Save & Review” tab
• Find “Save to my account” on the left side of the page.

You can access these saved projects anytime under ‘Projects’ on the home page.

To learn how to save a .JPEG of your design to your computer, here. To learn how to save a presentation style ‘Before & After’ PDF of your design, click here.

To print your Renoworks Pro designs:

1. Go to your Renoworks Pro Visualizer
2. Click on “Projects” on your home screen
3. Click on the project you would like to print
4. Go to the “Save & Review” tab
5. Click on ‘Print’ (Left side of the page) and follow the instructions.

To print multiple snapshots in the same presentation format, look at the instructions under “Save, view & print snapshots” (link) 

When you upload a photo, before you can start masking, the software will ask you to ‘Set Scale’. The scale helps the software understand how close or away you were from the house when you took the photo.

To set the scale, indicate the real life height of any given object of the house – for example, a door, window or the height of the house itself.

Do this by clicking on the top part of the object you are measuring (Point A), drawing a vertical line down and click on the bottom (Point B) to complete the measurement. The default scale is set to that of  a door at 6’ 8” however you have the option to adjust  the scale to define the height of whatever object you have selected. Make sure the line you draw is straight.

If you do not set the scale correctly, the products you want to apply to the home will not show correctly.

The foreground tool is used when something is obstructing the structure you are masking eg. Trees, mail boxes, bushes, fences, light bulbs, flowerpots  etc.. The foreground will act as the topmost layer of the design. The foreground tool allows you to mask anything that your visualizer should keep on top of the image. We suggest zooming into the object you want to mask as foreground so you can really concentrate on the details clicking as many times as you need to change direction to define the shape of the object you are trying to make foreground.

To share different options of the same project with your client, the snapshots tool will come in handy while sharing different design options with your Homeowners. Read about;

 What are Snapshots

How To Use Snapshots 

Save, View and Print Snapshots

• Go to the ‘Visualize tab
• Find the camera button (below the image) and click on one of the Snapshots you have taken.
• This will enlarge the snapshot image roll and allow you to select more than one. Once you select the ones you want to compare, hit “Compare Selected”
• You will then see a popup in a presentation style along with the before image.
• To see how to save this, read the section under ‘Saving & Sharing Designs”

Saved projects can be found under the ‘saved project’ on the homepage of your Renoworks Pro Visualizer. Snapshots enable you to change the Masking on a project while keeping the original masking version intact. You can save up to 10 Snapshots under each project in your account. Find the Snapshots (camera button) option under the “Visualize” tab.

The Snapshot tool helps you:

1. Provide customers with choice of products and how they look
2. Provide customers with options where the masking will require minor changes like in this example (Link to example above)
3. Compare products when your customers are confused or not able to make up their mind. Here is how you can save, view and print snapshots (Link to  Save, View and Print Snapshots)

Here is an example of a house to understand how to use the Snapshot tool better. Say you have to provide a customer with 2 options on an existing siding you will be replacing.

Option 1: Siding only

Option 2 : Siding with masonry kneeboard

To achieve option 1:

• Go to “draw” tab and mask the siding
• Set perspective
• Now go to “Visualize” and click on the little camera button and take a “Snapshot”

Option 2:

• You can now go back to the “Draw” tab and add an additional layer where you want the masonry kneeboard
• Now go back to “Visualize” tab, add the masonry option you likeand take a second “Snapshot”

You can now switch between the snapshots and play around with different options for each.

Don’t forget to save the project under “Save & Review”. Each saved project can have upto to 10 snapshots. This tool enables you to provide options or make versatile presentations to your customers. If you add the 11th snapshot when only 10 can be saves, it will over write snapshot no.1. You may save as many designs of each snapshot as you like to your computer.

To compare different options within a project, use the snapshot tool. Read more about;

What are Snapshots

How to use Snapshots

You set perspective to a layer by masking it under the “Draw” tab which will enable a set of new options on the left side of the page once the layer has been drawn. You can change, edit or reset the perspective of any layer at any time by going back to the “Draw” tab and clicking on the layer, you will then see the ‘Set Perspective’ option on the left. 

The Perspective tool lets the software know the angle of any surface. You need to set perspective for all siding and roofing. Any surface that is sloping or slanting.

The perspective tool is the most important tool while working on any elements with an angle (sloping or slanted). You must ALWAYS set perspective to siding and roofing layers. This tool allows your visualizer to know what angle the element is in and how close or further away it might be from where the photo was taken.

The Trim library is currently under the ‘Paint’ library in your Renoworks Pro Visualizer. You can read more about overlap of libraries here. Adding trim should be done at the right stage of the Masking process as the software works in layers (link).

The right time to work on Trim is after you have masked the siding and before you mask the windows (Just like you would on a real job!) Using the paint, trim or wall tool follow these steps:

1. Draw a square or rectangle beyond the window to the thickness you would like your trim to be.
2. Cut out the window
3. Go to the ‘Visualize’ tab and you can apply different paint colours to represent the trim.

The window will always apply as the top most layer and all you will see is the colour around the window looking like the trim.

Under the ‘Visualize’ tab, on the left side of the page you will find a red button with a wheel next to the search bar, you can select any color which will let you view all the products within a certain colour category.

The process of uploading an image and designing it is called Masking in your Renoworks Pro Visualizer. The Masking process takes place under the “Draw” tab. Before applying products to your clients home, you must mask the image to define various layers of the home. 

Before you get started, keep in mind that the software works in layers – what you mask first will appear as the bottom most layer. After that, each mask will go on top of the previous layer.

This rule applies to everything except doors and windows. They will appear on top of all the layers (except foreground) automatically. We recommend that you plan the order in which you will do the Masking before you get started. Eventually this will become second nature!

It can look something like this:

• Siding
• Masonry
• Roof
• Trim
• Windows
• Doors
• Foreground

A few things that will be good to know when you start:

• To mask an area you have to first select the category it fits under
• To start masking you will have to draw around the perimeter of an area clicking every time you want to change direction and ending where you started to complete a layer
• Every point you clicked on to change direction is movable, so don’t worry if your lines aren’t straight

Masking is the process of tracing or defining different surfaces of the house that you will apply your selected product and designs. You can do so under the ‘Draw’ tab. To learn more about Masking, watch this video. Alternatively, you can also book a one – on – one Quickstart Session with your Customer Success Ambassador here. 

. If you want to know more about this, call our support line at +1 877 980 3880, email us at support@renoworks.com, or speak to someone from the  Renoworks Pro Customer Success team on LiveChat.

Your time is a valuable thing. Renoworks offers ‘Design Services’ to help prepare your images, so you can focus on delivering exceptional quality and service to homeowners. To get started, go to www.renoworkspro.com/designrequest

You can customize your Renoworks Pro Visualizer in many ways! Several features you can customize are:

• Product types
• Manufacturers
• Product ranges within manufacturers
• Colors within product ranges
• Company Branding such as logo and color of buttons

To customize your Renoworks Pro Visualizer, please call our support line at +1 877 980 3880, email us at support@renoworks.com, or speak to someone from the  Renoworks Pro Customer Success team on LiveChat.

The ‘Paint’ library includes paint as well as trim manufacturers. To get access to the Paint library, you can also draw the surface as a wall.

The Renoworks Pro Visualizer library has a few overlaps. The ‘Trim’ library is the same as the Paint library and includes Trim options from some manufacturers like ABC seamless, Alside, Continental Manufacturing, Exterior Portfolio, James Hardie, Mitten. The Trim library right now is great to show your clients what the Trim color will look like on their house. If you draw the Trim as ‘Paint’ or ‘Wall’ you will get access to the same library because of the overlap.

The Renoworks Pro Visualizer library has a few overlaps.

The ‘Wall’ Library includes manufacturers within:

• Siding
• Paint
• Masonry

Sometime the settings on your email will block your Renoworks Pro Visualizer from creating a pop up with the link in the email to share with your clients or colleagues.

A quick fix for this:

• Go to the ‘Save & Review’ tab of your client’s project
• Copy the URL on the top of the browser
• Paste it in an email body and its ready to send to your client

To share the Renoworks Pro Visualizer with your clients:

• Go to the ‘Save & Review’ tab of your client’s project.
• Copy the URL on the top of the browser
• Paste it in an email body and send it to your client.

NOTE: Because your client does not have an account with Renoworks, they will only have access to view the “Visualize” and “Save & review” tabs.

Don’t forget you can customise any of the features before you share the visualizer with your client.

To save the presentation style Before and After version of your project:

• Click on “Print”
• Click on “Print Page” on the top left corner of the pop up window. This will generate another popup.
• On the pop up, hit “Print” again. This command will prompt you to save the presentation on your computer.
• Select the location you would like to save it under and you can now access the presentation style before and after photo from your computer.

You may then email this image to your customers.

To save the ‘Image Only’ format of your project:

• Click on  “Save & Review”.
• Click on “Print” and a pop-up will appear in a presentation format where there will be Before & After Presentation style of your project
• Right click on the image you want to save
• Click on “save image as”. This will enable you to select a location on your computer to save this design. It will be saved as a .JPG file

You may then email this image to your customers, add it to your website, a custom presentation or use it to create content for your social media channels or newsletters.

To save the presentation style before and after version of your project:

• Got to the ‘Save & Review’ tab
• Click on “Print”
• Click on “Print Page” on the top left corner of the pop up window. This will generate another popup.
• On the pop up, hit “Print” again while making sure the destination says PDF. This command will prompt you to save the presentation on your computer.
• Select the location you would like to save it under and you can now access the presentation style before and after photo from your computer.

You may then email this image to your customers, add it to your website, a custom presentation or use it to create content for your social media channels or newsletters.

You can print or save your designs as one of two styles:

1. Presentation Style (Before & After) in PDF

1. 1. Go to your Renoworks Pro Visualizer
   2. Click on “Projects” on your home screen
   3. Click on the project you would like to print to PDF
   4. Go to the “Save & Review” tab
   5. Click on “Print” and then “Print Page” on the top left corner of the pop up window
   6. This will generate another popup. Find the ‘Destination’ of this printer and make sure it says PDF and not the name of a printer
   7. This command will prompt you to save the presentation on your computer.
   8. Select the location you would like to save it under and save

1. Image Only Style in .JPEG
   1. Go to the “Save & Review” tab
   2. Click on “Print” and a pop-up will appear in a presentation format where there will be Before & After presentation style layout of your project.
   3. Right click on the image you want to save
   4. Click on “save image as”. This will enable you to select a location on your computer to save this design. It will be saved as a .JPG file.

You may then email this image to your client or team member, add it to a custom presentation or use it to create content for your website, social media channels or newsletters.

To save a design to your visualizer :

• Go to the “Save & Review” tab
• Find “Save to my account” on the left side of the page.

You can access these saved projects anytime under ‘Projects’ on the home page.

To learn how to save a .JPEG of your design to your computer, here. To learn how to save a presentation style ‘Before & After’ PDF of your design, click here.

To print your Renoworks Pro designs:

1. Go to your Renoworks Pro Visualizer
2. Click on “Projects” on your home screen
3. Click on the project you would like to print
4. Go to the “Save & Review” tab
5. Click on ‘Print’ (Left side of the page) and follow the instructions.

To print multiple snapshots in the same presentation format, look at the instructions under “Save, view & print snapshots” (link) 

When you upload a photo, before you can start masking, the software will ask you to ‘Set Scale’. The scale helps the software understand how close or away you were from the house when you took the photo.

To set the scale, indicate the real life height of any given object of the house – for example, a door, window or the height of the house itself.

Do this by clicking on the top part of the object you are measuring (Point A), drawing a vertical line down and click on the bottom (Point B) to complete the measurement. The default scale is set to that of  a door at 6’ 8” however you have the option to adjust  the scale to define the height of whatever object you have selected. Make sure the line you draw is straight.

If you do not set the scale correctly, the products you want to apply to the home will not show correctly.

The foreground tool is used when something is obstructing the structure you are masking eg. Trees, mail boxes, bushes, fences, light bulbs, flowerpots  etc.. The foreground will act as the topmost layer of the design. The foreground tool allows you to mask anything that your visualizer should keep on top of the image. We suggest zooming into the object you want to mask as foreground so you can really concentrate on the details clicking as many times as you need to change direction to define the shape of the object you are trying to make foreground.

To share different options of the same project with your client, the snapshots tool will come in handy while sharing different design options with your Homeowners. Read about;

 What are Snapshots

How To Use Snapshots 

Save, View and Print Snapshots

• Go to the ‘Visualize tab
• Find the camera button (below the image) and click on one of the Snapshots you have taken.
• This will enlarge the snapshot image roll and allow you to select more than one. Once you select the ones you want to compare, hit “Compare Selected”
• You will then see a popup in a presentation style along with the before image.
• To see how to save this, read the section under ‘Saving & Sharing Designs”

Saved projects can be found under the ‘saved project’ on the homepage of your Renoworks Pro Visualizer. Snapshots enable you to change the Masking on a project while keeping the original masking version intact. You can save up to 10 Snapshots under each project in your account. Find the Snapshots (camera button) option under the “Visualize” tab.

The Snapshot tool helps you:

1. Provide customers with choice of products and how they look
2. Provide customers with options where the masking will require minor changes like in this example (Link to example above)
3. Compare products when your customers are confused or not able to make up their mind. Here is how you can save, view and print snapshots (Link to  Save, View and Print Snapshots)

Here is an example of a house to understand how to use the Snapshot tool better. Say you have to provide a customer with 2 options on an existing siding you will be replacing.

Option 1: Siding only

Option 2 : Siding with masonry kneeboard

To achieve option 1:

• Go to “draw” tab and mask the siding
• Set perspective
• Now go to “Visualize” and click on the little camera button and take a “Snapshot”

Option 2:

• You can now go back to the “Draw” tab and add an additional layer where you want the masonry kneeboard
• Now go back to “Visualize” tab, add the masonry option you likeand take a second “Snapshot”

You can now switch between the snapshots and play around with different options for each.

Don’t forget to save the project under “Save & Review”. Each saved project can have upto to 10 snapshots. This tool enables you to provide options or make versatile presentations to your customers. If you add the 11th snapshot when only 10 can be saves, it will over write snapshot no.1. You may save as many designs of each snapshot as you like to your computer.

To compare different options within a project, use the snapshot tool. Read more about;

What are Snapshots

How to use Snapshots

You set perspective to a layer by masking it under the “Draw” tab which will enable a set of new options on the left side of the page once the layer has been drawn. You can change, edit or reset the perspective of any layer at any time by going back to the “Draw” tab and clicking on the layer, you will then see the ‘Set Perspective’ option on the left. 

The Perspective tool lets the software know the angle of any surface. You need to set perspective for all siding and roofing. Any surface that is sloping or slanting.

The perspective tool is the most important tool while working on any elements with an angle (sloping or slanted). You must ALWAYS set perspective to siding and roofing layers. This tool allows your visualizer to know what angle the element is in and how close or further away it might be from where the photo was taken.

The Trim library is currently under the ‘Paint’ library in your Renoworks Pro Visualizer. You can read more about overlap of libraries here. Adding trim should be done at the right stage of the Masking process as the software works in layers (link).

The right time to work on Trim is after you have masked the siding and before you mask the windows (Just like you would on a real job!) Using the paint, trim or wall tool follow these steps:

1. Draw a square or rectangle beyond the window to the thickness you would like your trim to be.
2. Cut out the window
3. Go to the ‘Visualize’ tab and you can apply different paint colours to represent the trim.

The window will always apply as the top most layer and all you will see is the colour around the window looking like the trim.

Under the ‘Visualize’ tab, on the left side of the page you will find a red button with a wheel next to the search bar, you can select any color which will let you view all the products within a certain colour category.

The process of uploading an image and designing it is called Masking in your Renoworks Pro Visualizer. The Masking process takes place under the “Draw” tab. Before applying products to your clients home, you must mask the image to define various layers of the home. 

Before you get started, keep in mind that the software works in layers – what you mask first will appear as the bottom most layer. After that, each mask will go on top of the previous layer.

This rule applies to everything except doors and windows. They will appear on top of all the layers (except foreground) automatically. We recommend that you plan the order in which you will do the Masking before you get started. Eventually this will become second nature!

It can look something like this:

• Siding
• Masonry
• Roof
• Trim
• Windows
• Doors
• Foreground

A few things that will be good to know when you start:

• To mask an area you have to first select the category it fits under
• To start masking you will have to draw around the perimeter of an area clicking every time you want to change direction and ending where you started to complete a layer
• Every point you clicked on to change direction is movable, so don’t worry if your lines aren’t straight

Masking is the process of tracing or defining different surfaces of the house that you will apply your selected product and designs. You can do so under the ‘Draw’ tab. To learn more about Masking, watch this video. Alternatively, you can also book a one – on – one Quickstart Session with your Customer Success Ambassador here. 

. If you want to know more about this, call our support line at +1 877 980 3880, email us at support@renoworks.com, or speak to someone from the  Renoworks Pro Customer Success team on LiveChat.

Your time is a valuable thing. Renoworks offers ‘Design Services’ to help prepare your images, so you can focus on delivering exceptional quality and service to homeowners. To get started, go to www.renoworkspro.com/designrequest

You can customize your Renoworks Pro Visualizer in many ways! Several features you can customize are:

• Product types
• Manufacturers
• Product ranges within manufacturers
• Colors within product ranges
• Company Branding such as logo and color of buttons

To customize your Renoworks Pro Visualizer, please call our support line at +1 877 980 3880, email us at support@renoworks.com, or speak to someone from the  Renoworks Pro Customer Success team on LiveChat.

The ‘Paint’ library includes paint as well as trim manufacturers. To get access to the Paint library, you can also draw the surface as a wall.

The Renoworks Pro Visualizer library has a few overlaps. The ‘Trim’ library is the same as the Paint library and includes Trim options from some manufacturers like ABC seamless, Alside, Continental Manufacturing, Exterior Portfolio, James Hardie, Mitten. The Trim library right now is great to show your clients what the Trim color will look like on their house. If you draw the Trim as ‘Paint’ or ‘Wall’ you will get access to the same library because of the overlap.

The Renoworks Pro Visualizer library has a few overlaps.

The ‘Wall’ Library includes manufacturers within:

• Siding
• Paint
• Masonry

Sometime the settings on your email will block your Renoworks Pro Visualizer from creating a pop up with the link in the email to share with your clients or colleagues.

A quick fix for this:

• Go to the ‘Save & Review’ tab of your client’s project
• Copy the URL on the top of the browser
• Paste it in an email body and its ready to send to your client